Post by ayubmd on Oct 15, 2016 11:32:47 GMT 5.5
Electric Iron Repair
Larger hardware stores may have replacement parts for popular brand electric irons. Also, you can get them from the manufacturer or an aftermarket supplier. Maintenance and repair tools you’ll need to fix an electric iron include these:
Screwdrivers
Toothpicks or pipe cleaners
Sewing needle
Commercial electric iron cleaning solution or vinegar and water
Commercial soleplate cleaner or baking soda and water
Steel wool
Emery cloth
Metal cooking pot
What Are the Steps to Electric Iron Repair?
Clean an electric iron:
Unplug the iron and make sure it is cool before cleaning.
Use a toothpick or pipe cleaner to remove buildup in the steam vents, making sure the debris doesn’t fall into the vents.
Use a fine sewing needle to carefully clean the spray nozzle of mineral deposits.
To flush sediment from a steam iron, pour 1/2 cup water and 1/2 cup vinegar into the water tank. Place the iron on a rack over a broiling pan and set the iron to steam until the tank runs dry. Repeat if necessary. Or follow the instructions for using a commercial iron cleaner.
Service an electric iron steam and spray mechanism:
Unplug the iron.
Use a fine sewing needle to unclog the steam valve assembly. Also, check the valve spring and replace it if it is broken or has lost tension.
If the spray pump is accessible, remove it and check for leaks by placing the spray tube in water and squirting the pump. Clean or replace as needed.
Clean an electric iron metal soleplate:
Unplug the iron.
Use a sponge and commercial soleplate cleaner or baking soda and water to remove dirt buildup on the soleplate. Rinse well with water and dry. Don’t use harsh abrasives or immerse an electric iron in water.
Use very fine steel wool (0000) or an emery cloth to remove scratches and burns on the soleplate, then clean the soleplate.
Fix-It Tip
Unless the instructions with your iron say it’s okay, don’t let water stand in your steam iron between uses. Drain all water from the iron, wrap the cord loosely around the handle, and store the iron in an upright position.